If you’re thinking about building a screened-in porch and are looking for a creative way to finish the interior, look no further. Shiplap is a beautiful way to go if you are a fan of farmhouse or cottage-style decorating.
I moved to a cute little house in need of some TLC this past winter, and waited (impatiently) for spring to arrive so I could have the existing screened porch removed and re-built. Here are before and after photos of the exterior.
After–Real landscaping will come next year.
My builder and I discussed several possible ways to finish the inside of the porch–all the usual ways. I scoured the internet hoping to find something not “usual”, but no luck.
I wanted the space to have the feel of an interior room—something quaint and cozy, and I was looking for something I could put nails into, to hang mirrors, clocks, pictures, hooks, etc…without feeling like I just destroyed something new. I like to move things around a lot, resulting in a Swiss-cheese type wall finish.
If you look closely at the before pictures at the beginning of this post, you can see that the inside walls had the exterior house siding on them. Not conducive to nails, and not very homey or interior-roomish looking in my opinion.
So here we are under construction in the next photo. I wanted a partial wall on the bottom half of the porch (as opposed to just window screen) not only for privacy reasons since I live in the city, but also to keep out as much of the weather as possible. Needless to say, construction began with no idea of how to finish the inside.
We got about to this stage in construction, and my builder was ever-so-patiently waiting for me to figure out what to do with the inside, when then the shiplap idea came to me in a wave that made my heart flutter just a bit.
I told my builder about my idea, and after he looked at me sort of funny, he called his lumber supplier to see if they carried shiplap. The response on the other end of the phone was, “Does this lady watch ‘Fixer Upper’?” I thought, “Who on the planet doesn’t watch ‘Fixer Upper’?”, but I kept that to myself because based on the blank look on my builder’s face, he was, in fact, that one person on the planet.
This is what shiplap looks like. It’s not tongue and groove, but rather the edges are notched as you can see here.
The price of cedar shiplap made me laugh, so we went with pine. I asked my builder about the possibility of installing a faux shiplap by running treated 1 x 8 boards horizontally, in order to keep the budget down. We decided against it because as treated wood dries, it separates quite a bit, leaving gaps between the boards. And who wants to look at Tyvek lettering, right? So I took a deep breath, put on my big girl panties and went with the real deal.
In an attempt to make the wood last as long as possible, I primed and painted all the surfaces of the boards, not just the side that would be visible. I paint for a living, and my new porch isn’t all that big, but I’m here to tell you that I nearly lost my mind before I got all the sides and surfaces primed and painted–three times. And of course the notches added some extra brushwork too.
So after a coat of primer and a coat of paint, I had to repaint again after installation in order to cover smudges and nail heads. If you decide to paint your own boards, you’ll need a lot of patience, a lot of space, a lot of time and perhaps an engineering degree in order to figure out how to stack all the boards so they can dry and not stick together.
Here’s what I should have done differently. I used an exterior primer, but the primer I used wasn’t strong enough to seal knots, and the knots bled through my primer and my two coats of exterior paint. Here’s how the knots looked when they reared their ugly heads. Irritating brownish dots. Everywhere. Shiplap with chicken pox wasn’t what I had in mind.
So if you decide to use pine shiplap, do yourself a favor and seal the knots first–before you prime and paint–with a primer that’s meant to keep knots from bleeding through. The product I purchased to seal the knots, was for sealing only the knots and not the entire board. This worked for me because I had already primed my boards, but I would recommend searching for a product that can be used on the knots as well as the rest of the board (assuming there is such a product) so you don’t have to seal all the knots, and then prime the rest of the boards with another product afterwards. Here’s what I used to seal the knots only.
As of this writing, roughly three months after construction, the knots are slightly starting to bleed through the paint again. I’m guessing it’s because the sealer was applied over paint and primer rather than directly on the bare knots. A heavy duty primer is worth paying for.
For my 14 x 16 porch, the shiplap cost around $800. I had enough leftover to build some planter boxes too! (See them here.) So here’s my shiplap porch all complete. I love the look of it, and the practicality of being able to nail into it with no worries. If I want to move the nails, I can leave the holes for a distressed look or I can fill them with putty and make them disappear. I could also just pound them in and leave them.
Welcome to my happy place.
This is the gable end.
I added some corbels that I bought years ago at an architectural salvage warehouse to the windows.
A very kind and thoughtful neighbor who is an electrician, installed an outlet for me as a welcome-to-the-neighborhood gift.
I don’t see shiplap as a fad or something trendy that will be dated in 10 years–I don’t do trendy. I think it’s classic, timeless and lovely. Shiplap adds a relaxed, cottagey feel to a space. Thank you, Chip and Joanna. (I even watch your re-runs.)
This post was written by Tracy Evans who is a Certified Home Stager, Certified Redesigner and Journeyman Painter. Feel free to visit her website at www.HelpAtHomeStaging.com to view her portfolio for more before and after pictures of her projects. And if you enjoy gardening, you may want to visit her gardening blog at MyUrbanGardenOasis.